|
1985MustangGT.com |
|
Mustang Part Weights |

|
Mustang Part Weights |
|||
|
Category |
Part Description |
Weight |
|
|
Chassis |
Stock rear bump stop |
1.4 |
pounds |
|
Engine |
Charcoal canister |
1.6 |
pounds |
|
Electronics |
A9P ECU |
1.6 |
pounds |
|
Electronics |
93 factory radio amp |
1.8 |
pounds |
|
Body |
Steel plate above knee in 90-93 dash |
2.4 |
pounds |
|
Electronics |
Convertible rear power window motor |
2.7 |
pounds |
|
Body |
93 inner fender liner, driver side |
2.8 |
pounds |
|
Engine |
Idler pulley |
2.8 |
pounds |
|
Chassis |
Rear Upper Control Arm - Stock |
3.0 |
pounds |
|
Chassis |
Rear Upper Control Arm - Jeg's SA |
3.0 |
pounds |
|
Engine |
Ford 302 timing chain cover, aluminum |
3.0 |
pounds |
|
Engine |
75mm EGR spacer and EGR valve |
3.1 |
pounds |
|
Chassis |
Stock rear shock ea. |
3.2 |
pounds |
|
Electronics |
Cruise control vacuum motor and cable |
3.2 |
pounds |
|
Chassis |
Hypercoil 300# - l0" long coil-over spring |
3.5 |
pounds |
|
Electronics |
Airbag sensors and brackets in front end |
4.5 |
pounds |
|
Engine |
Factory fan shroud no fan or bottle |
4.5 |
pounds |
|
Engine |
A/C evap and bottom brackets |
5.4 |
pounds |
|
Electronics |
93 V8 harness with relays, no sensors, no O2 harness, no injector harness |
6.0 |
pounds |
|
Engine |
Harmonic Balancer - Stock Ford 302/351W 28oz |
6.0 |
pounds |
|
Brakes |
Factory Fox3 Mustang pwr. brake booster |
6.0 |
pounds |
|
Engine |
Moroso air, GMS elbow, 90 lmaf, K&N filter |
6.3 |
pounds |
|
Body |
Center console armrest and tape holder |
6.4 |
pounds |
|
Chassis |
Rear Lower Control Arm - VC Engineering (4.6# min. with no shims) |
6.4 |
pounds |
|
Chassis |
Rear Lower Control Arm - Stock |
6.5 |
pounds |
|
Chassis |
Conventional Rear Spring - Stock |
7.0 |
pounds |
|
Chassis |
Front Coil-Over + Spring |
7.0 |
pounds |
|
Chassis |
Eibach 5" dia. rear spring |
7.0 |
pounds |
|
Engine |
Smog pump and pulley |
7.4 |
pounds |
|
Chassis |
Rear Lower Control Arm - Southside |
7.5 |
pounds |
|
Brakes |
SN95 brake booster (cobra 93 should be same) |
7.8 |
pounds |
|
Chassis |
SN95 Front Control Arm - Tubular |
8.0 |
pounds |
|
Body |
Fox3 Mustang hatch glass, Lexan |
8.0 |
pounds |
|
Brakes |
SN95 PBR Cobra Loaded Front Caliper |
9.0 |
pounds |
|
Brakes |
2000 Cobra R Brembo Loaded Front Caliper |
9.0 |
pounds |
|
Engine |
Factory air intake w/K&N and silencer and M.A. |
9.0 |
pounds |
|
Engine |
MK8 electric fan and factory coolant bottle |
9.1 |
pounds |
|
Brakes |
Brembo Loaded caliper w/ SS brake line |
9.1 |
pounds |
|
Chassis |
Conventional Front Spring - Eibach Drag |
9.5 |
pounds |
|
Body |
93 coupe rear seat bottom |
10.0 |
pounds |
|
Chassis |
V8 Rear Sway Bar |
10.5 |
pounds |
|
Chassis |
Tokico Illumina strut (Fox) |
11.0 |
pounds |
|
Body |
Fox3 Mustang hatch, fiberglass |
11.0 |
pounds |
|
Drivetrain |
Griggs 1" shorter Alum. driveshaft w/ yoke |
11.8 |
pounds |
|
Drivetrain |
Centerforce 302 flywheel, aluminum |
12.0 |
pounds |
|
Body |
93 coupe rear seat back |
12.5 |
pounds |
|
Engine |
Stock radiator, no cap |
12.6 |
pounds |
|
Chassis |
4cyl front sway bar w/brackets and bolts |
12.9 |
pounds |
|
Chassis |
Fox front LCA (modified) |
13.0 |
pounds |
|
Chassis |
Ford 5300C front spring (with isolators) |
13.5 |
pounds |
|
Drivetrain |
FMS aluminum driveshaft |
13.5 |
pounds |
|
Brakes |
Stock SN95 V6 caliper and bracket with pads and partial hose |
13.8 |
pounds |
|
Chassis |
SN95 Spindle & Hub (w/ARP studs) '94 vintage |
14.0 |
pounds |
|
Brakes |
SN95 GT/V6 Loaded Front Caliper |
14.0 |
pounds |
|
Drivetrain |
T-56 bellhousing |
14.0 |
pounds |
|
Electronics |
Alternator, fox3 |
14.0 |
pounds |
|
Brakes |
Stock SN95 V6 rotor |
14.3 |
pounds |
|
Chassis |
SN95 Front Control Arm - Stock |
14.5 |
pounds |
|
Engine |
Intake Manifold - Carbureted 302 Victor Jr. |
14.5 |
pounds |
|
Engine |
Edelbrock 302 aluminum water pump |
15.0 |
pounds |
|
Drivetrain |
Factory 4-lug, 8.8" axle shaft |
15.0 |
pounds |
|
Body |
'79 Mustang Aluminum Front Bumper |
15.0 |
pounds |
|
Engine |
Griffin 2 core alum. radiator, no cap |
15.1 |
pounds |
|
Engine |
Vortech S-trim blower, with pulley |
16.0 |
pounds |
|
Brakes |
'98 F-body front rotor |
16.0 |
pounds |
|
Body |
1987 HVAC Box w/o AC - includes heater core |
17.5 |
pounds |
|
Body |
Non-Airbag tilt steering column and wheel |
17.6 |
pounds |
|
Chassis |
IPS 4-link, upper mount brace |
18.0 |
pounds |
|
Brakes |
SN95 Cobra 13" Brembo Front Rotor |
19.0 |
pounds |
|
Drivetrain |
Centerforce T-5 clutch and "LMC" PP |
19.0 |
pounds |
|
Body |
Airbag steering column and wheel |
19.4 |
pounds |
|
Engine |
Intake Manifold - Carbureted 351W Victor Jr. |
19.5 |
pounds |
|
Drivetrain |
96 4.6L 4V Flywheel, iron |
19.5 |
pounds |
|
Drivetrain |
Stock V8 driveshaft w/ yoke |
19.6 |
pounds |
|
Engine |
Intake Manifold - GT-40 Upper w/ TB, thermostat housing, and EGR |
20.0 |
pounds |
|
Drivetrain |
86-'93 5.0L Flywheel, iron |
20.5 |
pounds |
|
Body |
Griggs Tubular K-member |
21.0 |
pounds |
|
Drivetrain |
9" (race) stall converter for C6 |
22.0 |
pounds |
|
Drivetrain |
FRPP 302 Flywheel, billet steel |
22.0 |
pounds |
|
Body |
86 Mustang blower box (w/ motor, airbox, heater core, & evaporator core) |
22.0 |
pounds |
|
Chassis |
V8 Front Sway Bar w/ brackets |
22.5 |
pounds |
|
Body |
1993 HVAC Box w/ AC - includes evap. & heater core |
22.5 |
pounds |
|
Drivetrain |
FRPP "King Cobra" T-5 clutch and PP |
22.5 |
pounds |
|
Engine |
Head - Canfield Aluminum w/ springs and valves |
23.5 |
pounds |
|
Engine |
Head - Canfield Aluminum w/ springs, valves, studs, & guide plates |
25.0 |
pounds |
|
Engine |
Intake Manifold - EFI Victor 5.0 |
27.0 |
pounds |
|
Engine |
Intake Manifold - Holley SysteMax Upper w/ TB, thermostat housing, and EGR |
27.0 |
pounds |
|
Body |
86 Mustang dash (w/ dash pad, reinforcement, radio, gauges, & vent ducting) |
28.0 |
pounds |
|
Engine |
Head - TFS Street Heat Aluminum w/ springs, valves, studs, & guide plates |
30.5 |
pounds |
|
Engine |
Intake Manifold - EFI Performer RPM 302 |
32.0 |
pounds |
|
Body |
86 Mustang LX front seat |
32.0 |
pounds |
|
Body |
Maximum Motorsports Tubular K-Member |
36.0 |
pounds |
|
Engine |
Crankshaft - 1981-95 5.0L (iron) |
36.0 |
pounds |
|
Body |
93 4 cyl driver seat w/ bracket |
37.4 |
pounds |
|
Engine |
Crankshaft - 1968 289 (iron) |
38.5 |
pounds |
|
Drivetrain |
Lakewood scattershield, 4.6L 4V |
39.0 |
pounds |
|
Engine |
Intake Manifold - TFS Street Heat, 302 |
40.0 |
pounds |
|
Engine |
Crankshaft - Eagle 347 (3.400") stroker (cast steel) |
41.0 |
pounds |
|
Engine |
Intake Manifold - SN95 Cobra 5.0L w/ elbow, TB, thermostat housing, and EGR |
41.0 |
pounds |
|
Body |
'86 Mustang Steel Front Bumper (includes two factory bumper struts) |
42.0 |
pounds |
|
Body |
Modified '86 GT K-Member |
45.0 |
pounds |
|
Wheel |
17x9 Cobra R58 wheel and 245x40 Sumitoro HTR 40Z tire mounted |
45.9 |
pounds |
|
Body |
86 Mustang GT front seat |
46.0 |
pounds |
|
Engine |
Head - 1968 Ford 289 Cast Iron w/ springs and valves |
46.5 |
pounds |
|
Body |
Modified '89 GT K-Member |
47.5 |
pounds |
|
Wheel |
17"x8" Bullitt wheel w/ Falken 245/45R17 tire |
48.0 |
pounds |
|
Engine |
Head - 1987-93 Ford 5.0L (E7TE) Cast Iron w/ springs and valves |
49.0 |
pounds |
|
Wheel |
17 x 11 CCW wheel, with 315/35/17 tire |
52.0 |
pounds |
|
Engine |
Crankshaft - Eagle 408W (4.00") stroker (forged steel) |
58.0 |
pounds |
|
Engine |
Head - '96-'98 4.6L 4V DOHC Aluminum w/ springs, valves, & cams |
60.0 |
pounds |
|
Engine |
Head - TFS Street Heat Cast Iron w/ springs, valves, studs, & plates |
62.0 |
pounds |
|
Body |
'86 Mustang rear hatch |
66.0 |
pounds |
|
Engine |
Block - 1996 Ford 4.6L Al DOHC block w/out main caps |
76.0 |
pounds |
|
Drivetrain |
85-93 Ford WC T-5 5-spd (w/ shifter; w/out fluid & bellhousing) |
79.0 |
pounds |
|
Drivetrain |
FRPP WC T-5Z 5-spd (w/ shifter; w/out fluid & bellhousing) |
83.0 |
pounds |
|
Engine |
Block - 1996 Ford 4.6L Al DOHC Block w/ steel 6-bolt main caps |
91.0 |
pounds |
|
Drivetrain |
Tremec 3550 5-spd (w/ shifter; w/out fluid & bellhousing) |
100.0 |
pounds |
|
Engine |